- PII
- S30345391S0869573325012029-1
- DOI
- 10.7868/S3034539125012029
- Publication type
- Article
- Status
- Published
- Authors
- Volume/ Edition
- Volume / Issue number 1
- Pages
- 20-29
- Abstract
- Thin composite solid lubricating coatings (SLC) TiAlZrN and TiAlZrN-InSn were obtained by sputtering (Ti, Al, Zr, InSn) of cathodes of different magnetrons. The structure, elemental and phase composition were studied by electron microscopy, X-ray spectral and X-ray diffraction analysis. The surface globularity of the coatings signi cantly increased with increasing indium content and decreasing Al/Zr concentration ratio. Different phase compositions were obtained in the coatings depending on the ratio of the main components: single-phase TiAlZrN with the lattice period a close to 4.24 Å, two-phase with InSn, two-phase, including nitride TiAlZrN with the lattice period ~4.24 Å, and ZrTiAlN, where a = 4.29-4.58 Å, and three-phase with InSn. The microhardness of the coatings reached 1056 HV0,05 with the highest values for a two-phase nitride structure. Tribological tests were carried out in the reciprocating wear mode. The friction coef cients of the coatings varied from 0.20 to 0.33. The lowest wear was obtained for coatings containing two nitride phases and indium in an amount of less than 3.7 at.%.
- Keywords
- твердое смазочное покрытие структура композитное покрытие магнетронное напыление коэффициент трения твердость
- Date of publication
- 03.02.2025
- Year of publication
- 2025
- Number of purchasers
- 0
- Views
- 24
References
- 1. Ouyang J.-H. High-temperature solid lubricants and self-lubricating composites: A critical review / Ouyang J.-H., Li Y.-F., Zhang Y.-Z., Wang Y.-M., Wang Y.-J. // Lubricants. 2022. V.10. P.177.
- 2. Lenz, B. Potential of nitrided and PVD-MoS2: Ti-coated duplex system for dry-running friction contacts / B. Lenz, S. Hoja, M. Sommer, H. Hasselbruch, A. Mehner, M. Steinbacher // Lubricants. 2022. V.10. Art.229.
- 3. Пат. 2416675 РФ. Способ формирования композитных твердосмазочных покрытий на рабочих поверхностях узлов трения / Л.Н. Лесневский, В.Н. Тюрин, А.М. Ушаков; опубл. 20.04.2011. - @@ Patent 2416675 RF. Method of forming composite solid lubricating coatings on working surfaces of friction units / L.N. Lesnevsky, V.N. Tyurin, A.M. Ushakov; published 20.04.2011.
- 4. Holmberg, K. Coatings tribology: properties, mechanisms, techniques and applications in surface engineering / K. Holmberg, A. Matthews. - [S.l.]: Elsevier, 2009. 560 p.
- 5. Zayatzev, A.N. An experimental study of tribological properties of threaded joints Inconel 718 - Grade 660 with a solid lubricant based on MoS2 / A.N. Zayatzev, J.I. Shoucheng, Y.P. Alexandrova // Proceed. 9th Intern. Conf, Industr. Eng. (ICIE). 2023. P.489.
- 6. Liu C. Ultralow-friction and ultralow-wear TiN-Ag solid solution coating in base oil / Liu C., Gu X., Yang L., Song X., Wen M., Wang J., Li Q., Zhang K., Zheng W., Chen C. // J. Phys. Chem. Let. 2020. V.11(5). P.1614-1621.
- 7. Блинков, И.В. Керамико-металлические (TiN-Cu) наноструктурные ионно-плазменные вакуумно-дуговые покрытия для режущего твердосплавного инструмента / И.В. Блинков, А.О. Волхонский, А.И. Лаптев, Т.А. Свиридова, Н.Ю. Табачкова, Д.С. Белов, А.В. Ершова // Изв. вузов. Порошковая металлургия и функциональные покрытия. 2013. №2. С.55-59. - @@ Blinkov, I.V., Volkhonskii, A.O., Laptev, A.I. et al. Ceramic-metallic (TiN-Cu) nanostructured ion-plasma vacuum-arc coatings for cutting hard-alloy tools. Russ. J. Non-ferrous Metals 55, 489-493 (2014). DOI: 10.3103/S106782121405006X.
- 8. Yea, F. Nanoindentation response analysis of TiN-Cu coating deposited by magnetron sputtering / F. Yea, X. Suna // Progress in Natural Science: Mater. Intern. 2018. V.28. P.40-44.
- 9. Guleryuz, C.G. Machining performance of TiN coatings incorporating indium as a solid lubricant as placeholders for microreservoir formation / C.G. Guleryuz, J.E. Krzanowski, S.C. Veldhuis, G.S. Fox-Rabinovich // Surface and Coatings Techn. 2009. V.203. P.3370-3376.
- 10. Hasegava, H. Ti1-xAlxN, Ti1-xZrxN and Ti1-xCrxN lms synthesized by the AIP / H. Hasegava, A. Kimura, T. Suzuki // Surface and Coatings Techn. 2000. V.132. P.76-79.
- 11. Lozovan, A.A. In uence of sputtering geometry and conditions on the structure and properties of the TiN- Pb solid lubricating coatings fabricated by magnetron co-sputtering of two separate targets / A.A. Lozovan, S.Y. Betsofen, S.V. Savushkina, M.A. Lychovetsky, L.N. Lesnevsky, I.A. Nikolaev, E.P. Kubatina // Russian Metallurgy (Metally). 2022. V.Supl. P.1441-1448.
- 12. Лозован, А.А. Исследование структуры и механизмов изнашивания твердых смазочных покрытий системы TIN-PB / А.А. Лозован, С.Я. Бецофен, С.В. Савушкина, М.А. Ляховецкий, Л.Н. Лесневский, И.А. Николаев, Ю.С. Павлов, Е.П. Кубатина, Л.Е. Агуреев // Поверхность. Рентгеновские, синхротронные и нейтронные исследования. 2023. №8. С.64-73. - @@ Lozovan, A.A., Betsofen, S.Y., Savushkina, S.V. et al. Study of the Structure and Mechanisms of the Wear of Solid-Lubricant Coatings of the TiN-Pb System. J. Surf. Investig. 2023. V. 17. P. 903-911. DOI: 10.1134/ S1027451023040274.
- 13. Lozovan, A. Investigation of structural and tribological characteristics of TiN composite ceramic coatings with Pb additives / A. Lozovan, S. Savushkina, M. Lyakhovetsky, I. Nikolaev, S. Betsofen, E. Kubatina // Coatings. 2023. V.13. Art.1463. DOI: 10.3390/ coatings13081463.
- 14. Guo H. Comparison of microstructures and properties of VN and VN/Ag nanocomposite lms fabricated by pulsed laser deposition / Guo H., Lu C., Zhang Z. [et al.] // Appl. Phys. A. 2018. V.124. P.694.
- 15. Cai Q. Adaptive VAlCN-Ag composite and VAlCN/ VN-Ag multilayer coatings intended for applications at elevated temperature / Cai Q., Bai X., Pu J. // J. Mater. Sci. 2022. V.57. P.8113-8126.
- 16. Лозован, А.А. Структура и трибологические характеристики покрытий TiAlN с добавками In, Sn и Pb / А.А. Лозован, С.В. Савушкина, С.Я. Бецофен, М.А. Ляховецкий, И.А. Николаев, Е.Ю. Жуков, Е.А. Данилина // Деформация и разрушение материалов. 2024. №8. С.10-19. - @@ Lozovan A.A., Savushkina S.V., Betzofen S.Ya., Lyakhovetskiy M.A., Nikolaev I.A., Zhukov E.Yu., Danilina E.A. Structure and tribological characteristics of TiAlN coatings with In, Sn and Pb additives // Deformation and Fracture of Materials. 2024. No. 8. P. 10-19. DOI: 10.31044/1814-4632-20248-10-19.
- 17. Lo W.-L. Improvement of high entropy alloy nitride coatings (AlCrNbSiTiMo)N on mechanical and high temperature tribological properties by tuning substrate bias / Lo W.-L., Hsu S.-Y., Lin Y.-C., Tsai S.-Y., Lai Y.-T., Duh J.-G. // Surface and Coatings Techn. 2020. V.401. Art.126247.
- 18. Wang, J. Insight into the structure and tribological and corrosion performance of high entropy (CrNbSiTiZr)C lms: First-principles and experimental study / Wang, J., Zhang, H., Yu X., Wang L., Huang W., Lu Z. // Surface and Coatings Techn. 2021. V.421. Art. 127468.
- 19. Thorton, J.A. Stress - related effects in thin lms / J.A. Thorton, D.W. Hoffman // Thin Solid Films. 1989. V.171. P.5.
- 20. Pearson, W.B. A handbook of lattice spacings and structures of metals and alloys / W.B. Pearson. - N.Y.: Pergamon Press, 1958. 1044 p.
- 21. Hassine, M.B. Growth model for high-Al containing CVD TiAlN coatings on cemented carbides using intermediate layers of TiN / M.B. Hassine, H.-O. Andr´en, A.H.S. Iyer, A. Lotsari, O. Bäcke, D. Stiens, W. Janssen, T. Manns, J. Kümmel, M. Halvarsson // Surface and Coatings Techn. 2021. V.421. Art.127361.
- 22. Zhou M. Phase transition and properties of Ti-Al-N thin lms prepared by r.f.-plasma assisted magnetron sputtering / Zhou M., Makino Y., Noose M., Nogi K. // Thin Solid Films. 1999. V.339. P.203-208.
- 23. Zhang R.-Z. Review of high entropy ceramics: design, synthesis, structure and properties / Zhang R.-Z., Reece M. J. // J. Mater. Chem. A. 2019. V.7. P.22148-22162.
- 24. Sarkar, A. High-Entropy oxides: fundamental aspects and electrochemical properties / A. Sarkar, Q. Wang, A. Schiele, M.R. Chellali, S.S. Bhattacharya, D. Wang, T. Brezesinski, H. Hahn, L. Velasco, B. Breitung // Advanced Materials. 2019. V.31. Art.1806236. 9 p.
